PCRESYNTAX(3)

NAME
PCRE - Perl-compatible regular expressions

PCRE REGULAR EXPRESSION SYNTAX SUMMARY

The full syntax and semantics of the regular expressions that are supported by PCRE are described in the pcrepattern documentation. This document contains just a quick-reference summary of the syntax.

QUOTING

  \x where x is non-alphanumeric is a literal x
  \Q...\E treat enclosed characters as literal

CHARACTERS

  \a alarm, that is, the BEL character (hex 07)
  \cx "control-x", where x is any character
  \e escape (hex 1B)
  \f formfeed (hex 0C)
  \n newline (hex 0A)
  \r carriage return (hex 0D)
  \t tab (hex 09)
  \ddd character with octal code ddd, or backreference
  \xhh character with hex code hh
  \x{hhh..} character with hex code hhh..

CHARACTER TYPES

  . any character except newline;
               in dotall mode, any character whatsoever
  \C one byte, even in UTF-8 mode (best avoided)
  \d a decimal digit
  \D a character that is not a decimal digit
  \h a horizontal whitespace character
  \H a character that is not a horizontal whitespace character
  \N a character that is not a newline
  \p{xx} a character with the xx property
  \P{xx} a character without the xx property
  \R a newline sequence
  \s a whitespace character
  \S a character that is not a whitespace character
  \v a vertical whitespace character
  \V a character that is not a vertical whitespace character
  \w a "word" character
  \W a "non-word" character
  \X an extended Unicode sequence

In PCRE, by default, \d, \D, \s, \S, \w, and \W recognize only ASCII characters, even in UTF-8 mode. However, this can be changed by setting the PCRE_UCP option.

GENERAL CATEGORY PROPERTIES FOR \p and \P

  C Other
  Cc Control
  Cf Format
  Cn Unassigned
  Co Private use
  Cs Surrogate

  L Letter
  Ll Lower case letter
  Lm Modifier letter
  Lo Other letter
  Lt Title case letter
  Lu Upper case letter
  L& Ll, Lu, or Lt

  M Mark
  Mc Spacing mark
  Me Enclosing mark
  Mn Non-spacing mark

  N Number
  Nd Decimal number
  Nl Letter number
  No Other number

  P Punctuation
  Pc Connector punctuation
  Pd Dash punctuation
  Pe Close punctuation
  Pf Final punctuation
  Pi Initial punctuation
  Po Other punctuation
  Ps Open punctuation

  S Symbol
  Sc Currency symbol
  Sk Modifier symbol
  Sm Mathematical symbol
  So Other symbol

  Z Separator
  Zl Line separator
  Zp Paragraph separator
  Zs Space separator

PCRE SPECIAL CATEGORY PROPERTIES FOR \p and \P

  Xan Alphanumeric: union of properties L and N
  Xps POSIX space: property Z or tab, NL, VT, FF, CR
  Xsp Perl space: property Z or tab, NL, FF, CR
  Xwd Perl word: property Xan or underscore

SCRIPT NAMES FOR \p AND \P

Arabic, Armenian, Avestan, Balinese, Bamum, Bengali, Bopomofo, Braille, Buginese, Buhid, Canadian_Aboriginal, Carian, Cham, Cherokee, Common, Coptic, Cuneiform, Cypriot, Cyrillic, Deseret, Devanagari, Egyptian_Hieroglyphs, Ethiopic, Georgian, Glagolitic, Gothic, Greek, Gujarati, Gurmukhi, Han, Hangul, Hanunoo, Hebrew, Hiragana, Imperial_Aramaic, Inherited, Inscriptional_Pahlavi, Inscriptional_Parthian, Javanese, Kaithi, Kannada, Katakana, Kayah_Li, Kharoshthi, Khmer, Lao, Latin, Lepcha, Limbu, Linear_B, Lisu, Lycian, Lydian, Malayalam, Meetei_Mayek, Mongolian, Myanmar, New_Tai_Lue, Nko, Ogham, Old_Italic, Old_Persian, Old_South_Arabian, Old_Turkic, Ol_Chiki, Oriya, Osmanya, Phags_Pa, Phoenician, Rejang, Runic, Samaritan, Saurashtra, Shavian, Sinhala, Sundanese, Syloti_Nagri, Syriac, Tagalog, Tagbanwa, Tai_Le, Tai_Tham, Tai_Viet, Tamil, Telugu, Thaana, Thai, Tibetan, Tifinagh, Ugaritic, Vai, Yi.

CHARACTER CLASSES

  [...] positive character class
  [^...] negative character class
  [x-y] range (can be used for hex characters)
  [[:xxx:]] positive POSIX named set
  [[:^xxx:]] negative POSIX named set

  alnum alphanumeric
  alpha alphabetic
  ascii 0-127
  blank space or tab
  cntrl control character
  digit decimal digit
  graph printing, excluding space
  lower lower case letter
  print printing, including space
  punct printing, excluding alphanumeric
  space whitespace
  upper upper case letter
  word same as \w
  xdigit hexadecimal digit

In PCRE, POSIX character set names recognize only ASCII characters by default, but some of them use Unicode properties if PCRE_UCP is set. You can use \Q...\E inside a character class.

QUANTIFIERS

  ? 0 or 1, greedy
  ?+ 0 or 1, possessive
  ?? 0 or 1, lazy
  * 0 or more, greedy
  *+ 0 or more, possessive
  *? 0 or more, lazy
  + 1 or more, greedy
  ++ 1 or more, possessive
  +? 1 or more, lazy
  {n} exactly n
  {n,m} at least n, no more than m, greedy
  {n,m}+ at least n, no more than m, possessive
  {n,m}? at least n, no more than m, lazy
  {n,} n or more, greedy
  {n,}+ n or more, possessive
  {n,}? n or more, lazy

ANCHORS AND SIMPLE ASSERTIONS

  \b word boundary
  \B not a word boundary
  ^ start of subject
               also after internal newline in multiline mode
  \A start of subject
  $ end of subject
               also before newline at end of subject
               also before internal newline in multiline mode
  \Z end of subject
               also before newline at end of subject
  \z end of subject
  \G first matching position in subject

MATCH POINT RESET

  \K reset start of match

ALTERNATION

  expr|expr|expr...

CAPTURING

  (...) capturing group
  (?<name>...) named capturing group (Perl)
  (?'name'...) named capturing group (Perl)
  (?P<name>...) named capturing group (Python)
  (?:...) non-capturing group
  (?|...) non-capturing group; reset group numbers for
                   capturing groups in each alternative

ATOMIC GROUPS

  (?>...) atomic, non-capturing group

COMMENT

  (?#....) comment (not nestable)

OPTION SETTING

  (?i) caseless
  (?J) allow duplicate names
  (?m) multiline
  (?s) single line (dotall)
  (?U) default ungreedy (lazy)
  (?x) extended (ignore white space)
  (?-...) unset option(s)

The following are recognized only at the start of a pattern or after one of the newline-setting options with similar syntax:

  (*UTF8) set UTF-8 mode (PCRE_UTF8)
  (*UCP) set PCRE_UCP (use Unicode properties for \d etc)

LOOKAHEAD AND LOOKBEHIND ASSERTIONS

  (?=...) positive look ahead
  (?!...) negative look ahead
  (?<=...) positive look behind
  (?<!...) negative look behind

Each top-level branch of a look behind must be of a fixed length.

BACKREFERENCES

  \n reference by number (can be ambiguous)
  \gn reference by number
  \g{n} reference by number
  \g{-n} relative reference by number
  \k<name> reference by name (Perl)
  \k'name' reference by name (Perl)
  \g{name} reference by name (Perl)
  \k{name} reference by name (.NET)
  (?P=name) reference by name (Python)

SUBROUTINE REFERENCES (POSSIBLY RECURSIVE)

  (?R) recurse whole pattern
  (?n) call subpattern by absolute number
  (?+n) call subpattern by relative number
  (?-n) call subpattern by relative number
  (?&name) call subpattern by name (Perl)
  (?P>name) call subpattern by name (Python)
  \g<name> call subpattern by name (Oniguruma)
  \g'name' call subpattern by name (Oniguruma)
  \g<n> call subpattern by absolute number (Oniguruma)
  \g'n' call subpattern by absolute number (Oniguruma)
  \g<+n> call subpattern by relative number (PCRE extension)
  \g'+n' call subpattern by relative number (PCRE extension)
  \g<-n> call subpattern by relative number (PCRE extension)
  \g'-n' call subpattern by relative number (PCRE extension)

CONDITIONAL PATTERNS

  (?(condition)yes-pattern)
  (?(condition)yes-pattern|no-pattern)

  (?(n)... absolute reference condition
  (?(+n)... relative reference condition
  (?(-n)... relative reference condition
  (?(<name>)... named reference condition (Perl)
  (?('name')... named reference condition (Perl)
  (?(name)... named reference condition (PCRE)
  (?(R)... overall recursion condition
  (?(Rn)... specific group recursion condition
  (?(R&name)... specific recursion condition
  (?(DEFINE)... define subpattern for reference
  (?(assert)... assertion condition

BACKTRACKING CONTROL

The following act immediately they are reached:

  (*ACCEPT) force successful match
  (*FAIL) force backtrack; synonym (*F)

The following act only when a subsequent match failure causes a backtrack to reach them. They all force a match failure, but they differ in what happens afterwards. Those that advance the start-of-match point do so only if the pattern is not anchored.

  (*COMMIT) overall failure, no advance of starting point
  (*PRUNE) advance to next starting character
  (*SKIP) advance start to current matching position
  (*THEN) local failure, backtrack to next alternation

NEWLINE CONVENTIONS

These are recognized only at the very start of the pattern or after a (*BSR_...) or (*UTF8) or (*UCP) option.

  (*CR) carriage return only
  (*LF) linefeed only
  (*CRLF) carriage return followed by linefeed
  (*ANYCRLF) all three of the above
  (*ANY) any Unicode newline sequence

WHAT \R MATCHES

These are recognized only at the very start of the pattern or after a (*...) option that sets the newline convention or UTF-8 or UCP mode.

  (*BSR_ANYCRLF) CR, LF, or CRLF
  (*BSR_UNICODE) any Unicode newline sequence

CALLOUTS

  (?C) callout
  (?Cn) callout with data n

SEE ALSO

pcrepattern(3), pcreapi(3), pcrecallout(3), pcrematching(3), pcre(3).

AUTHOR

Philip Hazel
University Computing Service
Cambridge CB2 3QH, England.

REVISION

Last updated: 12 May 2010
Copyright (c) 1997-2010 University of Cambridge.