SE-100M Data Sheet

Introduction

The SE-100M is a mini-mighty Serial-to-Ethernet embedded module which adds network function for legacy RS-232/422/485 devices.

Serial-to-Ethernet Data Conversion

The SE-100M provides a transparent data channel between serial device and the TCP/IP network, so that the serial device can be accessed by using standard TCP/IP protocols.

Versatile Operation Modes

The SE-100M can behave as a TCP server, a TCP client or an UDP node on a Ethernet network to fulfill versatile application requirements.

Programmable Digital I/O

Besides, the SE-100M also provides 6 TTL plus 3 CMOS digital I/Os. A pre-defined ASCII command set is provided for users to control these I/Os through LAN/WAN.

Specifications

Form Factor

Type: 30-pin dual-inline drop-in module
Pitch: 2.00mm
WxLxH: 40x45x13mm

Network Interface

Type: 10/100BaseT, auto-detect
Protocols: TCP, UDP, HTTP, Telnet, IP, ICMP, ARP
IP addressing: DHCP, Static IP

Operation Modes

TCP/Server, TCP/Client and UDP mode

Serial Interface (TTL-level)

Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Baud: 1,200 to 38,400 bps
Parity: None, Even, Odd
Data bits: 7,8
Stop bit: 1,2
Flow control: None, RTS/CTS, XON/OFF

Programmable Digital I/O

PIO0~PIO5: TTL level compatible
PIO6~PIO8: CMOS level compatible

Configuration Methods

Web console, Telnet Console and Serial Console
Windows utility (included in CD)

General

Power input: 5VDC
Power consumption: 100mA@+5VDC
Operation temp.: 0~70C, 5~95% RH
Storage temp.: -20~85C, 5~95% RH
Regulation: CE/FCC compliant
Warranty: 2 years

ETx+	1
ETx-	2
ERx+	3
ERx-	4
Link/Act	5
PIO0	6
PIO1	7
PIO2	8
PIO3	9
Reset	10
Ready	11
SW1	12
SW2	13
GND	14
+5V	15

Introduction

Serial-to-Ethernet Data Conversion

Versatile Operation Modes

Programmable Digital I/O

Specifications

Block Diagram

Pin Assignment

Dimensions

Ordering Information

SE-100M

SE-100M-EV

16	RxD
17	TxD
18	RTS
19	CTS
20	DCD
21	DSR
22	DTR
23	PIO4
24	PIO5
25	PIO6
26	PIO7
27	PIO8
28	NC
29	NC
30	GND