SE-110S Data Sheet

Introduction

The SE-110S is a mini-mighty Serial-to-Ethernet embedded module which adds network function for legacy RS-232 devices. The SE-110S provides a transparent data channel between RS-232 device and the TCP/IP network, so that the device can be accessed by using standard TCP/IP protocols.

Versatile Operation Modes

The SE-110S can behave as a TCP server, a TCP client or an UDP node on a Ethernet network to fulfill versatile application requirements.

Programmable Digital I/O

Besides, the SE-110S also provides 4 TTL digital I/Os. A pre-defined ASCII command set is provided for users to control these I/Os through LAN/WAN.

Specifications

Form Factor

Type: stand alone module with mounting holes
WxLxH: 57x40x15mm (PCB)

Network Interface

Type: 10/100BaseT, auto-detect
Protocols: TCP, UDP, HTTP, Telnet, IP, ICMP, ARP
IP addressing: DHCP, Static IP

Operation Modes

TCP/Server, TCP/Client and UDP mode

RS-232 Interface (line driver included)

Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Baud: 1,200 to 38,400 bps
Parity: None, Even, Odd
Data bits: 7,8
Stop bit: 1,2
Flow control: None, RTS/CTS, XON/OFF

Programmable Digital I/O

PIO0~PIO3: TTL level compatible

Configuration Methods

Web console, Telnet Console and Serial Console
Windows utility (included in CD)

General

Power input: 5VDC
Power consumption: 120mA@+5VDC
Operation temp.: 0~70C, 5~95% RH
Storage temp.: -20~85C, 5~95% RH
Regulation: CE/FCC compliant
Warranty: 2 years

PIN	GPIO
1	GND
2	SW1
3	Reset
4	PIO3
5	Ready
6	PIO2
7	100M_LED
8	PIO1
9	10M_LED
10	PIO0
11	+5V
12	GND
13	+5V
14	GND

Introduction

Versatile Operation Modes

Programmable Digital I/O

Specifications

Pin Assignment

Block Diagram

Ordering Information

SE-110S

J1 (RS-232)
PIN	GPIO
1	DCD
2	Rx
3	Tx
4	DTR
5	GND
6	DSR
7	RTS
8	CTS
9	---
10	---