Products

Industrial Communication Gateway

Aport-211S

Single-port Serial-to-Ethernet Gateway

  • Enables access to RS-232 / 422 / 485 devices
    through TCP/IP network

  • Ethernet port: 10/100Mbps, auto-select

  • Serial port: RS-232 / 422 / 485, 38.4Kbps baud rate

  • DIO port: 8 x TTL-level programmable I/Os

  • Supports TCP / Server and TCP / Client modes

  • Web / Telnet / Serial consoles for device configuration

  • Windows utility for device configuration and management

  • Easy-to-use ASCII command set is provided to help users implement their own configuration and / or management utilities

  • Power input: 9~40VDC; 70mA@12V

Aport-212

Dual-port Modbus Gateway

  • Gateway of Modbus / TCP to Modbus RTU / ASCII

  • 1 x Ethernet port, 10/100Mbps

  • 2 x serial ports: 1 x RS-232 / 485, 1 x RS-232 / 422 / 485

  • Supports up to 16 x Modbus / TCP masters or 32 x Modbus / TCP Slaves

  • Supports transparent serial to Ethernet conversion

  • Windows configuration utility included

  • Supports telnet, web and serial console configuration

  • Power input: 9~40VDC via power jack or terminal block

Aport-213

One Port Serial-to-WiFi Gateway

  • Connect RS-232/422/485 devices to IEEE 802.11b/g/n network

  • 921.6Kbps baud rate for RS-232/422/485 transmission

  • Web / Serial consoles for device configuration

  • WiFi Gateway: AP mode, Station mode, WiFi WPS, WiFi direct

  • Modbus RTU to Modbus / TCP Gateway

  • Supports TCP / Server mode and TCP / Client mode

  • Secure data access with WEP-64/128, WPA, WPA2

  • Security: WEP-64/128, WPA, WPA2

  • Windows application Utility

SE-100M

Serial-to-Ethernet Embedded Module

  • 30-pin dual-inline drop-in module adds Ethernet connectivity to RS-232 / 422 / 485 device

  • Ethernet interface: 10/100Mbps, auto-select

  • Serial interface: asynchronous UART, 38.4Kbps baud, TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

  • GPIOs: 5 x TTL-level IOs plus 3 x CMOS-level IOs

  • Supports TCP / Server, TCP / Client and UDP modes

  • Easy-to-use ASCII command set is provided to help users implement their own configuration and / or management utilities

  • Power input: 5VDC; 100mA@5V