Products
Linux Cortex-A8 System on Module
M-5360A
Freescale i.MX537, Linux-ready System on Module with 2 x LVDS, 1 x VGA, 1 x LAN, 3 x UART, 1 x CAN, 1 x SATA and 1 x 480Mbps USB2.0 Host port
OS: Ubuntu 10.4 with file system
CPU: Freescale i.MX537 (Cortex A8), 800MHz
Flash: 4GB, eMMC type
SDRAM: 1GB, DDR3
LCD interface: 2 x LVDS, up to 1600 x 1200 pixels
VGA interface: 1 x sync. with LVDS channel 1
Multimedia: Full HD 1080p, OpenGLE and OpenVG
Ethernet interface: 1 x 10/100Mbps
USB Host interface: 1 x USB 2.0 compliant supports high speed mode (480Mbps)
SD card interface: 1 x 32GB max.
UART interface: 3 x 921.6Kbps
I2C interface: yes
I2S interface: yes, including 1 x transmitter and 1 x receiver
SPI interface: yes, w/ 4 x chip select signals
GPIO interface: 8 pins, CMOS / 3.3V compatible
Dimensions: 80mm x 50mm
Power input: 80mA@3.3V
M-5360A Starter Kit
Starter Kit for M-5360A System On Module
One M-5360A module on board
Ethernet: 1 x 10/100Mbps, RJ45 connector
VGA: 1, DB-15 connector
RS-232 x 3: DB-9 connector x 1, pin header x 2
RS-485 x 1: Terminal block
CAN bus x 2: Terminal block
USB Host x 4: USB type A connector x 4
USB OTG x 1: mini USB type AB connector
Audio: Line out and MIC in connector
I2C: pin header x 1
microSD socket x 1
Battery socket x 1
LCD backlight control x 2: 12VDC x 1, 5VDC x 1
SATA connector x 1
1-Wire connector x 1
GPIO connector x 1
LVDS connector x 1
Touch screen connector x 1
Power: 9~48VDC power jack