Matrix-520

Linux-ready ARM9 Computer
with LCM, 2x LAN, 8x TTY, 2x USB, 21x GPIO

  • CPU: ATMEL AT91RM9200 (ARM9-core)
  • OS: Linux 2.6.x pre-built
  • Memory: 64MB SDRAM and 16MB Flash
  • LCM display: 18x2, built-in English font
  • Storage: one SD memory card slot inside
  • USB 2.0 ports: two hosts
  • Ethernet port: two, 10/100Mbps
  • GPIO: 21x pins, CMOS/TTL-level
  • TTY (serial) ports: eight, 921.6Kbps baud
  • Audio out: support mp3 and wav format
  • GNU C/C++ tool chain included
  • Power input: 9~40VDC, 300mA@12V

Matrix-510

Linux-ready ARM9 Computer
with 2x LAN, 8x TTY, 2x USB, 21x GPIO

  • CPU: ATMEL AT91RM9200 (ARM9-core)
  • OS: Linux 2.6.x pre-built
  • Memory: 64MB SDRAM and 16MB Flash
  • Storage: one SD memory card slot inside
  • USB 2.0 ports: two hosts
  • Ethernet port: two, 10/100Mbps
  • GPIO: 21x pins, CMOS/TTL-level
  • TTY (serial) ports: eight, 921.6Kbps baud
  • Audio out: support mp3 and wav format
  • GNU C/C++ tool chain included
  • Power input: 9~40VDC, 300mA@12V

Matrix-514

Linux-ready ARM9 Computer
with 4x LAN, 4x TTY, 2x USB, 21x GPIO

  • CPU: ATMEL AT91RM9200 (ARM9-core)
  • OS: Linux 2.6.x pre-built
  • Memory: 64MB SDRAM and 16MB Flash
  • Storage: one SD memory card slot inside
  • USB 2.0 ports: two hosts
  • Ethernet port: four, 10/100Mbps
  • GPIO: 21x pins, CMOS/TTL-level
  • TTY (serial) ports: four, 921.6Kbps baud
  • GNU C/C++ tool chain included
  • Power input: 9~40VDC, 300mA@12V

Matrix-512

Linux-ready ARM9 Computer
with 2x LAN, 4x TTY, 2x USB, 21x GPIO

  • CPU: ATMEL AT91RM9200 (ARM9-core)
  • OS: Linux 2.6.x pre-built
  • Memory: 64MB SDRAM and 16MB Flash
  • Storage: one SD memory card slot inside
  • USB 2.0 ports: two hosts
  • Ethernet port: two, 10/100Mbps
  • GPIO: 21x pins, CMOS/TTL-level
  • TTY (serial) ports: four, 921.6Kbps baud
  • GNU C/C++ tool chain included
  • Power input: 9~40VDC, 300mA@12V

Matrix-500

Linux-ready ARM9 Computer
with 1x LAN, 4x TTY, 2x USB ports

  • CPU: ATMEL AT91RM9200 (ARM9-core)
  • OS: Linux 2.6.x pre-built
  • Memory: 64MB SDRAM and 8MB Flash
    (Flash can be upgrade to 64MB)
  • Storage: one SD memory card slot inside
  • USB 2.0 ports: two hosts
  • Ethernet port: one, 10/100Mbps
  • TTY (serial) ports: four, 921.6Kbps baud
  • GNU C/C++ tool chain included
  • Power input: 9~48VDC, 300mA@12V

M-501 System-On-Module

Linux-ready ARM9 Embedded SoM

  • ATMEL AT91RM9200 CPU, 200MIPS @180MHz
  • 64MB SDRAM, 16MB NOR FLASH memory
  • One 10/100 Mbps Ethernet interface
  • Two USB 2.0 Host ports
  • One SD (secure digital) interface
  • Four 921.6kbps UARTs
  • I2C (Inter-IC) bus
  • I2S (Inter-IC Sound) bus,
    one transmitter and one receiver
  • SPI (Serial Peripheral Interface)
  • GPIO: 32x pins, CMOS/TTL-level
  • 8-bit local bus (A0-A7, D0-D7), with 4x chip selects
  • Small footprint, 80x50mm ony
  • Ultra low power consumption, less than 2.5W
  • Linux 2.6.x OS is pre-built, supports file system
  • GNU C/C++ tool chain is included

M-501 Starter Kit

Evaluation Kit for M-501 Embedded SOM

  • One M-501 embedded module
  • One carrier board with
    • one RS-232/422/485 line driver, RJ45 connector
    • three RS-232 line drivers, RJ45 connector
    • one RJ45 connector for Ethernet
    • two USB host connectors
    • two 20-pin headers for 32x GPIOs
    • Status LEDs for Etherent port and serial port
    • power input circuitry (9~48VDC)
  • GNU C/C++ Tool Chain CD and documentation