M-9G45A

ATMEL 9G45, Linux-ready 128-pin System-on-Module
with TTL LCD interface, 1x LAN, 4x UART ports
and 1x 480Mbps USB2.0 compliant Host port

  • Linux kernel 2.6.38 with file system
  • CPU: ATMEL AT91SAM9G45, 400MHz
  • Flash: 128MB, NAND type
  • SDRAM: 128MB
  • LCD interface: TTL(24-bit), upto 1280 x 860 pixels
  • Ethernet interface: 1x, 10/100Mbps
  • USB Host interface: 1x, USB 2.0 compliant
    supports high speed mode (480Mbps)
  • SD card interface: 1x, 32GB max.
  • UART: 4x 921.6kbps w/ hardware flow control
  • I2C interface: yes
  • I2S interface: yes, including
    1x transmitter and 1x receiver
  • SPI interface: yes, w/ 2x chip select signals
  • GPIO interface: 15x pins, CMOS/3.3V compatible
  • Dimensions: 80mm x 50mm
  • Power input: 80mA@3.3V
  • GNU C/C++ tool chain for Linux and Windows
Artila M-9G45A, ATMEL AT9G45, Linux, System on Module

M-9G45A-EV

Evaluation Kit for M-9G45A System-On-Module

  • One M-9G45A system-on-module
  • One carrier board with the following interface:
  • * LCD interface (TTL): 2x
  • * LCD interface (LVDS): 1x
  • * Backlight Controls: 2x, for 5V or 12V LCDs
  • * Touchscreen interface: 4-wire, resistive type
  • * Ethernet: 1x, 10/100Mbps
  • * TTY: 1x 485 and 3x RS-232
  • * USB Host: 4x, USB 2.0 compliant
  • * USB Client: 1x, USB 2.0 compliant
  • * GPIO: 15x pins, CMOS/TTL-level
  • * Micro-SD socket: 1x
  • * Audio: 1x input and 1x output
  • * Status LEDs: for power, Etherent and TTY ports
  • * Power input circuitry (9~30VDC)
  • Carrier board circuitry schematics (pdf)
  • GNU C/C++ tool chain for Linux and Windows
Artila M-9G45A Evaluation Kit, ATMEL AT9G45, Linux, System On Module

M-502

ATMEL 9G20, Linux-ready 128-pin System-On-Module

  • Linux kernel 2.6.29 with file system
  • CPU: ATMEL AT91SAM9G20 w/MMU, 400MHz
  • Flash: 128MB, NAND type
  • SDRAM: 64MB
  • Ethernet interface: 1x, 10/100 Mbps
  • USB Host interface: 2x, USB 2.0 compliant
  • SD card interface: 1x, 32G max.
  • UART: 4x 921.6kbps w/ hardware flow control
  • I2C interface: yes
  • I2S interface: yes, including
    1x transmitter and 1x receiver
  • SPI interface: yes, w/ 2x chip select signals
  • GPIO interface: 32x pins, CMOS/3.3V compatible
  • Local bus: 8 bits, including
    A0-A7, D0-D7 and 3x chip selects
  • Dimension: 80mm x 50mm
  • Power input: 80mA@3.3V
  • GNU C/C++ tool chain for Linux and Windows
Artila M-502, ATMEL AT9G20, Linux, System On Module

M-501

ATMEL 9200, Linux-ready 128-pin System-On-Module

  • Linux 2.6.14 computing platform with file system
  • CPU: ATMEL AT91RM9200, 180MHz
  • Flash: 16MB, NOR type
  • SDRAM: 64MB
  • Ethernet interface: 1x, 10/100 Mbps
  • USB Host interface: 2x, USB 2.0 compliant
  • SD card interface: 1x, 2GB max.
  • UART: 4x 921.6kbps w/ hardware flow control
  • I2C interface: yes
  • I2S interface: yes, including
    1x transmitter and 1x receiver
  • SPI interface: yes, w/ 2x chip select signals
  • GPIO interface: 32x pins, CMOS/3.3V compatible
  • Local bus: 8 bits, including
    A0-A7, D0-D7 and 4x chip selects
  • Dimensions: 80mm x 50mm
  • Power input: 80mA@3.3V
  • GNU C/C++ tool chain for Linux and Windows
Artila M-501, ATMEL ATG200, Linux, System On Module

M-501 Starter Kit

Starter Kit for M-501 System-On-Module

  • One M-501 embedded module
  • One carrier board with the following interface:
  • * Ethernet: 1x, 10/100Mbps
  • * TTY: 1x RS-232/422/485 and 3x RS-232
  • * USB Host: 2x, USB 2.0 compliant
  • * GPIO: 32x pins, CMOS/TTL-level
  • * Status LEDs: for power, Etherent and TTY ports
  • * Power input circuitry (9~48VDC)
  • Carrier board circuitry schematics (pdf)
  • GNU C/C++ tool chain for Linux and Windows
Artila M-501 Starter Kit, ATMEL AT9200, Linux, System On Module