Features
- Arduino-Based Programmable Industrial IoT Gateway
- Rugged Design for Harsh Industrial Environment
- Espressif ESP32 Xtensa® Dual-Core 32-bit LX6 Microprocessor, 240 MHz
- Onboard 520KB SRAM, 4MB Flash
- Easy Software Development (IDE/C-language/Arduino/Micro Python)
- Suitable for Accessing Modbus Device
- One LAN Port, 10/100Mbps Ethernet
- Two Serial Ports: 1xRS-485 & 1xRS-232
- Wireless (Can Be Enabled): IEEE 802.11 b/g/n, 2.4GHz Single Band
- 2xDigital Inputs and 1xRelay Out
- ID Setting by Rotary Switch
- One Micro-SD Socket Internally
- Wide-Range Temperature Operating
- DIN-Rail Mounting, Optional Wall-Mounting
- Protective Earthing Design with Chassis Ground Screw
H/W Specifications
- MCU: ESP32-D0WD-V3, Xtensa® dual-core 32-bit LX6 microprocessor
- Frequency: Up to 240MHz
- SDRAM: 520KB for data and instructions
- Flash: 448KB for booting and core functions
- Wi-Fi (ESP32): 802.11b/g/n, 2.4GHz single band
- Type: 1x 10/100Mbps Ethernet (SPI interface)
- Connector Type: RJ45
- COM1: Isolated RS-485 (1500Vrms isolation)
- COM2: RS-232
- Signal: RS-485 (Data+, Data-), RS-232 (TX/RX)
- Connector: Terminal block
- LED Indicator: YES
- 2 x Digital Input channels
- Isolation Protection: 5000Vrms (Photo-Coupler)
- Logical High: 5~24VDC
- Logical Low: 0~1.5VDC
- 1x Digital Output Channels (Relay)
- Contact Rating: 125VAC@0.5A / 30VDC@1.0A
- Max Switching Voltage: 125VAC / 60VDC
- Max Switching Current: 2A
- 1x Micro-SD socket inside (SPI interface)
- SD 2.0 compliant, supports SDHC
- 1 x microUSB console port
- Authoring and Debug: YES
- Rotary Switch: 1x 8-position rotary switch
- ID Setting or Application Mode: Device ID setting or Application mode selection
- Watchdog: Yes(ESP32)
- Real-Time Clock (RTC): YES (ESP32)
- Power Input Voltage: +9~+40 VDC (terminal block)
- Typical Consumption: 12VDC@150mA
- Dimensions (W x L x H): 30 x 140 x 95mm (1.18 x 5.51x 3.74in)
- Operating Temperature: 0~70°C (32~158°F)
- Regulation: CE Class A, FCC Class A
- Installation: DIN-rail mounting & Wall mounting
S/W Specifications
- Easy to Use C/C++ Platform (Arduino ESP32)
- Matrix-310 is C/C++ programmable, Arduino(ESP32) compatible industrial IoT platform
- Install Arduino core(ESP32) through board manager of Arduino IDE
- Free Xtensa C/C++ toolchain
- Free Arduino official IDE
- Free Microsoft Arduino plugin for VS code
- Example codes to access Cloud APIs
- Example codes to access Modbus RTUs
Ordering Information
- Arduino-Based Programmable Industrial IoT Gateway