Matrix-900

Quad-Core Cortex-A72 Powered IIoT Gateway Supports M.2 AI Inference Accelerator

Artila Iot Gateway, Matrix-900 Quad-Core Cortex-A72 Powered IIoT Gateway Supports M.2 AI Inference Accelerator

Features

  • Processor: BCM2711, Quad Core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
  • DDR: 1/2/4/8GB, eMMC: 8/16/32GB
  • 1 x 10/100Mbps Ethernet Interface, 1 x Gigabit Ethernet
  • 2 x USB 2.0 Compliant Hosts
  • 1 x HDMI Port
  • 4 x RS-485 Serial Ports
  • M.2 Expansion Socket
  • miniPCIe Expansion Socket, 1 x microSD Socket

H/W Specifications

  • SoM: Raspberry Pi Compute Module 4
  • Processor: BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
  • DDR: 1/2/4/8GB
  • eMMC: 8/16/32GB
  • By design, the Matrix-900 does not support booting from an SD card

  • 1 x Gigabit Ethernet
  • 1 x 10/100Mbps Ethernet
  • Connector: RJ45 (with LED indicator)

  • 2 x USB 2.0 compliant hosts
  • Supports 480Mbps high speed mode
  • Connector: Type A

  • 4 x RS-485 serial ports
  • Auto direction control: yes
  • Terminal resistor: 120Ω, enable/diable by jumper
  • Connector: Terminal block
  • RS-485 Signal: Data+, Data-
  • Baudrate: upto 12Mbps
  • Data bits: 7, 8
  • Stop bits: 1, 2
  • Parity: Odd/Even/Mark/Space/None

  • 1 x microSD socket
  • SD 3.0 compliant
  • Storage capacity: SDXC
  • By design, the Matrix-900 does not support booting from an SD card

  • RS-232 serial port (inside the box)
  • Signal: Tx/Rx/GND
  • Connector: 4-pin wafer
  • Communication parameters: 115,200bps, N81

  • 1 x HDMI port
  • HDMI 2.0 compliant, upto 4K@60fps
  • Connector: Type A

  • Codec: TI TLV320
  • Connector: 3.5mm audio jack (4-pole)
  • Mated plug: 3.5mm TRRS connector
  • Standard: CTIA(MGRL) or OMPT(GMRL)

  • Interface: PCIe (1-lane, Gen2)
  • Key type: B Key
  • Use case 1: AI inference accelerator
  • Use case 2: 5G/GPS communication module
  • Use case 3: SSD module
  • Nano-SIM socket: yes, on-board (SIM-M)
  • Module dimension: supports upto 30x52mm
  • Fixing screws: at 42mm and 52mm position

  • 1 x miniPCIe Full-size socket
  • Interface: USB 2.0
  • Supports 480Mbps high speed mode
  • Use case 1: 4G/GPS communication module
  • Use case 2: Wi-Fi/BLE module
  • Nano-SIM socket: yes, on-board (SIM-E)
  • Module dimension: supports full-size module
  • Fixing screws: for full-size modules

  • Yes, on-board
  • Backup: external battery
  • Connector: 2-pin 1.25mm wafer box

  • Dimensions (W x H x D): 45 x 166 x 120mm
  • Typical power Consumption: 1A@12VDC
  • Operation temperature: 0~70°C (32-158°F)
  • Regulation: CE Class A, FCC Class A
  • Installation: Wall mounting, DIN-rail mounting (with optional kit)

Ordering Information

  • Standard integrated package, a CM4 (4G/16G, no-WiFi) with thermal pad is mounted on the IO board and the whole assembly is packaged into a sheet metal box. Mounting accessories are included, and the Raspberry Pi OS with desktop is also pre-installed in factory.

  • IO Board only, necessary terminal blocks are included. Users need to prepare and install preferred CM4 and OS by themselves.

  • The standard sheet metal box used for Matrix-900. Mounting accessories are included.

  • CM4 is the abbreviation of Raspberry Pi Comput Module 4
Data Sheet