M-X6ULL-B

Linux-ready Cortex-A7 System on Module

Artila System on Module, M-X6ULL-B Linux-ready Cortex-A7 System on Module

Features

  • NXP i.MX6ULL Cortex-A7 CPU, Up to 800MHz
  • Linux Kernel 5.10.x (or up) with Boot Loader & File System
  • Toolchain: gcc 9.3.x + glibc 2.31
  • 512MB DDR3/LvDDR3 SDRAM, 16GB eMMC
  • 1x 10/100MHz Ethernet Interface
  • Multiple Interfaces: 4x UART, 2x USB, I2C/I2S/SPI/GPIO/RMII
  • SD Interface, Serial Console
  • 24bits RGB Display Interface, 4-Wired Resistive Touch Interface
  • Compact Size: 50 x 80mm
  • Single 3.3VDC Power-In

H/W Specifications

  • CPU: NXP i.MX6ULL Cortex-A7 MPCore, Up to 800MHz
  • SDRAM: 512MB, DDR3/LvDDR3
  • eMMC: 16GB

  • Signals: cmd, clock, data0~3, card_detect
  • SDHC Compatible

  • Type: 1 x 10/100Mbps Ethernet with PHY
  • Signal: EXT+, EXT-, ERX+, ERX
  • Protection: 1.5KV Magnetic isolation

  • UART1~4: TX, RX, RTS, CTS, GND
  • Signal Level: 3.3V

  • Baud Rate: up to 921.6Kbps
  • Parity: None, Even, Odd, Mark, Space
  • Data Bits: 5, 6, 7, 8
  • Stop Bits: 1, 1.5, 2
  • Flow Control: RTS / CTS, XON / XOFF, None

  • Supports 480Mbps high-speed mode
  • 1x Host USB 2.0 Port, 1x USB Client Port

  • Transmit Signals: TX, Sync, CLK
  • Receive Signals: RX

  • Signals: data(SDA), clock (SCL)

  • Data Signal: MISO, MOSI, SCLK
  • Chip Select: CS1

  • Total No. of Pins: 15

  • Serial console port (TX / RX / GND)

  • One 24bits RGB digital parallel display interface
  • Support max 85 MHz display clock, Up to WXGA (1366x768) at 60Hz

  • Support 4-wire resistive touch panel

  • Signal: cmd, clock, data0~3, card detect
  • SDHC compatible

  • Power Input: +3.3VDC, Consumption: 0.75Watts (Typical)
  • Watch-Dog Timer: YES
  • Real-Time Clock (RTC): YES
  • Dimensions (W x L): 50 x 80mm
  • Mounting Hole x 2 reserved , 2.0mm (M2) in diameter
  • Pins: Total 128pins, 2.0mm pitch, CN1(28pin)/CN2(50pin)/ CN3(50pin)

S/W Specifications

  • Linux kernel 5.10.x (or up)
  • Support bootup from eMMC or SD card
  • Boot Loader: Barebox
  • File System: EXT4/EXT3/EXT2, VFAT/FAT, NFS
  • GUI Engine: X11

  • Matchbox (X11 Desktop Environment)
  • Built-in Firefox / Chromium browser

  • Toolchain: gcc 9.3.0 + glibc 2.31
  • Supports in-place C/C++ code compilation

  • Package repository: Artila self-maintained repository
  • Command: Using standard apt-get command

Ordering Information

  • Linux-ready Cortex-A7, 800MHz System on Module with 512MB SDRAM, 16G eMMC, (PIN-Header type)
Data Sheet
Hardware Guide
Software Guide
Resource Link