RIO-2010

Modbus / TCP Remote Digital I/O Module

Artila Remote I/O Module, RIO-2010 Modbus/TCP Remote Digital I/O Module

Features

  • Web Based Remote I/O Monitoring and Control
  • Web Server and Web Interface Ready
  • Modbus, AJAX, MQTT
  • Stand-Alone Alarm Relay Control and Email Alert
  • Periodically Data and Event Publishing to Server (Broker) via MQTT
  • 8 x Relay Out Form A or Form B Relay with Contact Rating 30VDC@1A or 125VAC@0.5A
  • 16 x Isolated Digital Input and 3 x Maxim 1-Wire Temperature Measurement
  • 1 x 10/100Mbps Ethernet Port

H/W Specifications

  • CPU: NXP Arm Cortex-M3 LPC1768 100MHz
  • Memory: 512KB on-chip Flash, 64KB SRAM

  • Type: 1 x 10/100Mbps, RJ45 connector
  • Protection: 1500Vrms magnetic isolation

  • Isolation Protection: 2500Vrms
  • Direction Control: Auto, by hardware
  • Connector: Terminal block
  • Baud Rate: 1.2~460.8Kbps
  • Parity: None, Even, Odd, Mark, Space
  • Data Bits: 5, 6, 7, 8
  • Stop Bits: 1, 1.5, 2

  • No. of Channels: 16
  • Photo Isolation (AC in): 5000Vrms
  • Logical High: 5~24VDC
  • Logical Low: 0~1.5VDC
  • LED Indicators: Yes

  • No. of Channels: 8
  • Contact Rating: 30VDC@1A or 125VAC@0.5A
  • LED Indicators: Yes

  • No. of Channels: 3
  • Connector: 3-pin header (VDD, DQ, GND)

  • Temperature Sensor: Maxim DS18B20 (optional accessory 91-6DS18-001)
  • Temperature Range: -55°C~125°C
  • Accuracy: +/-0.5°C
  • Real-Time Clock (RTC): Manual or NTP (Network Time Protocol) setup and sync.
  • Power Input: +9 ~ +48VDC
  • Power Consumption: 12VDC@220mA(max.), 12VDC@55mA(min.)
  • Dimensions (W x H x D): 182 x 118 x 36mm (7.16x4.64x1.42in)
  • Operating Temperature: 0~70°C (32~158°F)

Access Control Guidelines

  • Modbus / TCP Port: 502
  • Telnet Console Port: 5001
  • HTTP Port: 5003

  • Modbus / TCP via LAN interface
  • Modbus / ASCII, Modbus / RTU via RS-485 interface

  • AJAX-enabled demo page for up-and-running web-based monitoring and controls

  • Modbus TCP / RTU slave
  • Web direct I/O control
  • MQTT auto data and event publish and log
  • Stand-alone alarm relay control and email alert
  • C / C++ programmable controller (RIO-2010PG)

Ordering Information

  • Modbus / TCP Remote Digital I/O Module

  • Console Cable (10Pin Header to DB9 Male, 20cm)

  • Programmable Resolution 1-wire Digital Thermometer

  • 100~240VAC to 12VDC 1A Power Adapter
Data Sheet
User Guide
Resource Link