Features
- Remote Analog Input Module with Web Access AJAX and Modbus TCP
- One 10/100Mbps Ethernet Port
- 8x 16bit A/D, Isolation up to 2500Vrms
- 1 x Relay Output (Form A or Form B Relay with Contact Rating 30VDC@1A or 125VAC@0.5A)
- Support Web-Based I/O Control
- Optional DIN RAIL Mounting Kit (DK-35A)
- Windows Configuration Utility Included
Hardware Specifications
- CPU: NXP Arm Cortex-M3 LPC1768 100MHz
- Memory: 512KB on-chip Flash, 64KB SRAM
- Type: 1 x 10/100Mbps, RJ45 connector
- Protection: 1.5KV Magnetic isolation
- Protocol: Modbus / TCP, UDP, HTTP, DHCP
- No. of Channels: 8
- Input Type: Differential input
- Input Mode: Voltage / Current
- Resolution: 16-bit
- Input Range:
- Unipolar: 0~150mV, 0~500mV, 0~1V, 0~5V, 0~10V
- Bipolar: +/-150mV, +/-500mV, +/-1V, +/- 5V, +/-10V
- Current: 0~20mA
- Input Impedance: 20M Ohm (voltage), 120 Ohm (current)
- Accuracy: +/-0.1% FSR
- Isolation: 2500Vrms
- No. of Channels: 1
- Contact Rating: 30VDC@1A or 125VAC@0.5A
- Power Input: +9~+48VDC (Terminal block)
- Protection: Auto polarity and surge protect
- Dimensions (W x H x D): 78 x 108 x 24mm (3.0x4.25x0.94in)
Access Control Guidelines
- Modbus / TCP Port: 502
- Telnet Console Port: 5001
- HTTP Port: 5003
- Modbus / TCP via LAN interface
- AJAX-enabled demo page for up-and-running web-based monitoring and controls
Windows Utility Functionalities
- Broadcast search
- Configuration
- User web page conversion
Ordering Information
- Analog Input Remote I/O Module
- DIN RAIL Mounting Kit
- 100~240VAC to 12VDC 1A Power Adapter